DISPENSING VALVES FOR MEDIUM-HIGH VISCOSITY FLUIDS
Pneumatic dispensing valves, on-off, non volumetric, for continuous or impulsive doses.
Suitable for dosing or dispensing of greases, oils, pastes, silicones or resins.
Possible dosing range from microdoses up to continuous dispensing as in filling or liquid seal applications.
Suitable for direct feeding from tank or pump or integrated with volumetric dosers for precision filling or precision liquid sealing. Manual output flow adjustment through knob.
Aluminum body.
HIGH PRESSURE VOLUMETRIC/METERING DOSERS
Pneumatic volumetric dosers for precision impulsive doses.
Suitable to dose greases, oils, pastes and silicone-based fluids low-to-high viscosities.
Inlet fluid pressure max 150bar.
Dosing range from 0,03 to 100cc according to selected model.
Mechanical suck-back effect at the end of the dosing cycle to help detaching the tip in presence of gluey fluids.
Dose manually adjustable through graduated knob.
Materials: aluminum, brass.
TWIN COLUMN ELEVATOR EXTRUSION PUMPS FROM 1 TO 200 LT
Extrusion pumps featuring
twin-column pneumatic elevator.
Suitable to feed dosing systems with greases, pastes, medium-to-high viscosity silicones and resins.
Dashboard includes full frontal controls and indicators.
Size fit for 1-3 liter canisters, 5 to 50 liter pails and 200 liter drums/barrels.
Custom made extrusion disc/plate sized upon packaging.
Optional: minimum level pump stopping device.
2-hand safety controls.
CARTRIDGE EXTRACTORS
Pneumatic cartridge extractor tank.
Suitable to feed dosing systems with silicones, resins, adhesives, pastes or lubricants in cartridge packaging.
Cartridge safety locking system made by TM.
REVOLVING VOLUMETRIC/METERING CONTINUOUS DOSERS
Electric volumetric continuous dosers based on gear-dosing technology.
Suitable to dose greases and silicones, low to high viscosities.
Volumetric dispensing of microdoses, continuous strings/doses or precision filling.
Brushless motor integrated.
Requires dedicated TM electronic drive and/or control unit/panel.
VOLUMETRIC/METERING LINEAR DOSERS
Electric volumetric linear dosers for high precision dosing applications.
Suitable for lubricants, pastes, silicones, one- or two- component resins, gap fillers, thermal greases and fluids from low to high viscosity, also with aggressive chemical or physical properties.
Volumetric dispensing of microdoses, continuous strings or precision filling.
Brushless or stepper motor integrated.
Requires dedicated TM electronic drive and/or control unit/panel.
Possibility of custom-made projects for size, capacity and dosed fluids.
VOLUMETRIC/METERING LINEAR DOSERS FOR TWO-COMPONENT RESINS
Electric volumetric linear dosers for high precision dosing applications of two-component resins.
Suitable for two-component fluids such as resins, silicones, gap fillers, low to high viscosity, also with aggressive chemical or physical properties.
Volumetric dispensing of microdoses, continuous strings or precision filling.
Brushless or stepper motor integrated.
Requires dedicated TM electronic drive and/or control unit/panel.
Possibility of custom-made projects for size, capacity and dosed fluids.
PROCESS CONTROL UNITS
Dosing process control systems.
Devices and accessories which can be integrated or added on TM
impulse or continuous dosing systems/elements.
Suitable for lubricants, resins, silicones, pastes, glues and adhesives.
Technologies of flow detection, dispensing detection and volume detection/control for dose and process validation, against possible air bubbles, dosing/feeding/flow anomalies or nozzle clogging.
NEEDLE DISPENSING VALVES FOR LOW-MEDIUM VISCOSITY FLUIDS
Pneumatic needle valves, non volumetric, for continuous or impulsive/spot fluid applications.
Suitable for low to medium viscosity fluids such as oils, glues, silicones, emulsions, water, paints, inks, solvents, greases, pastes, resins, etc.
Suitable for continuous
dosing/dispensing or filling applications or timed-dosing/microdosing.
Flow adjustable mechanically with finely milled ticking knob.
Material: aluminum.
Suitable for straight feeding from pressure tank/pump or paired with volumetric/metering continuous dosers as remote dispensing head for
precision dosing.
DEGASSING MACHINES
Machines for fluid degassing/de-aerating processes.
Suitable for lubricants and damping silicone fluids at low, medium, high or very high viscosity.
TM's patented process with closed fluid circuit, which automatically loads a batch from pump/tank, to reduce the risks of contamination or oxidation of the treated fluid.
Working capacity up to 4 liters per cycle, depending on the model.
Closed discharging and tank/accumulator filling under vacuum conditions to preserve the fluid when the degassing process is finished and the machine fills the detachable accumulators with the treated fluidAutomatic filling process of SB-AUTO accumulator tanks or cartridges.
DOSING MACHINES TWO-COMPONENT FLUIDS
Dosing systems for two-component fluids.
Suitable for two-component silicones and resins with medium- to high- viscosities.
Fully integrated system which includes two twin extrusion pumps for pails from 5 to 50 liters, inserted within two containment and protection cabins.
On the side is the dosing system control panel with touch screen to manage the dosing head(s), which are usually two-component electric volumetric dosing groups with various technologies available.
Dosing head(s) can be integrated within the machine or remoted on an external automation or robot.
VACUUM-BASED DOSING MACHINES
Custom machines and technologies for precision filling or encapsulating processes under vacuum conditions, for electronics, cinematics or hydraulics like shock absorbers, hinges or dampers.
The Vacuum Filling family uses TM's patented degassing processes and vacuum injection techniques which are developed custom for each project and component, so the customer is followed personally at every step and the best results are guaranteed.
Possibility to develop standalone units or automated units to be inserted within automated assembly lines.
